toys Archives - Page 18 of 68

This Lego Pumpkinbot Has A Lot Of Spice.

If you are looking for a way to spice up your Lego pumpkins this year, then this Pumpkinbot is for you. The whole thing transforms from an innocent looking pumpkin into a deadly battle bot. This Lego Pumpkinbot is the work of Chris Maddison. Who wants everyone to have a Happy Halloween this year with these complementary instructions. Now you too can build your own. The first thing you will need is a part list:

30602 – 16 Orange slopes
3020 – 8 Orange 2×4 plate
6141 – 15 Dark Bley Circular 1×1 flat
6141 – 2 Reddish Brown Circular 1×1 flat
6141 – 1 Trans-Red Circular 1×1 flat
87087 – 2 Dark Bley 1×1 with Stud on 1 Side
61252 – 8 Dark Bley 1×1 with open O clip
3794b – 1 Dark Bley 2×1 with 1 stud center
60478 – 2 Dark Bley 2×1 with handle on end
2540 – 1 Dark Bley 2×1 with handle on side
2555 – 2 Dark Bley 1×1 with clip on top
3062b – 2 Dark Bley 1×1 round grey tall
30162 – 2 Dark Bley Binoculars
3023 – 1 Dark Bley 2×1 Plate
32002 – 2 Dark Bley Technic 3/4 Pin
30033 – 1 Dark Bley 2×2 with bar frame
11090 – 1 Dark Bley Bar holder with clip
98138 – 1 Trans-Red Flat-top 1×1
6246a – 1 Dark Bley Utensil Tool Screwdriver
4740 – 1 Orange 2×2 Radar dish
4081b – 1 Dark Bley 1×1 with clip
4081b – 1 Reddish Brown 1×1 with clip
4285b – 1 Orange 6×6 Webbed Radar Dish
4599 – 1 Orange 1×1 Tap
33183 – 1 Bright Green Carrot Top

If you need to purchase everything it should add up to about $15-20 depending on shipping. And, if you are lucky enough to own everything already… get building.

Check out Chris Maddison’s Pumpkinbot and the Instructions over on Flickr: https://www.flickr.com/photos/cmaddison/10601306324/

Thanks to Reddit and JimmyLegs50 for the parts list: https://www.reddit.com/r/lego/comments/2kfkqb/pumpkin_bot_with_instructions_not_by_me/

Lego Comics With The Hulk and Captain America, or “I remember when comics were 30 cents”

Hulk Smash Lego bricks. These Lego versions of comic book covers are the creation of monsterbricks. The Lego comic book covers are also relief sculptures. Where a 3D image/figure is sculpted in front of the background. In this case it is The Incredible Hulk breaking through the ground, literally breaking out of the background and into your face. This is even more pronounced with the Captain America cover below. These Comic-Bricks (Lego Comics) are extremely fun. The overall design is greatly supported by the typography and logos, which is difficult to replicate with Lego bricks. Here the lettering is using a combination of brick built letters, and custom printed tiles. The end result is great. Check out the custom UPCs, price tags, publisher icons, etc. These are great recreations of their real life comic book inspirations; The Incredible Hulk #59, and Captain America #109.

Lego has had great success with their Super Heroes theme. It is a little bit weird that they have managed to license both Marvel Comics and DC Comics. Lego has been releasing mostly modern themed comic book stuff. With just a little of the classic or silver-age represented (The 1966 Batmobile). It would be awesome if Lego were to release 1 or 2 sets a year based on the golden-age or silver-age stuff. Imagine all the possibilities with Minifigures based on Jack Kirby, Gil Kane, Steve Ditko, Stan Lee, and John Romita designs.

This post has been approved by the Comics Code Authority.

Check out monsterbrick’s Brick-Comics (Lego Comics) over on Flickr: https://www.flickr.com/photos/monsterbrick/15408223229/

A Bad Day for Admiral Piett

“Interrupting Lord Vader in his meditation chamber, Admiral Piett quickly found himself at the top of the imperial execution list.”

Who knows what Darth Vader gets up too in his meditation chamber. Whatever it is, you do not want to be the officer who interrupts his private time. Cpt. Brick imagines Darth Vader clowning around in his spare time. This Lego Star Wars MOC, titled A Bad Day for Admiral Piett, is a great example of the humor found in Lego.

Check out A Bad Day for Admiral Piett over on Flickr: https://www.flickr.com/photos/cptbrick/15005338104/

LegoGenre | 00392: The Mouth Of Sauron Is Ravenous

The Mouth of Sauron is Ravenous.

Lego Tiger’s Nest Monastery (Paro Taktsang)

This Lego Tiger’s Nest Monastery (also known as Paro Taktsang, and Taktsang Palphug Monastery) is the creation of Anu Pehrson. This is an extremely accurate Lego MOC, almost every major detail from the real life inspiration is represented here. The four main temples have been expertly recreated. With the red, brown, gold, and white color palette accurately represented too. Even the windows match up with the source. The original model took over 8 months to create using 200,000 Lego pieces. This Lego Tiger’s Nest Monastery is a great example of a project that is never complete. The current model is up to version 1.2, with landscaping and prayer flags added in the previous updates.

The original temple was built in 1692 at the location of the Taktsang Senge Samdup cave. A holy site where Guru Padmasambhava meditated for 3 years, 3 months, 3 weeks, 3 days, and 3 hours. The temple is credited as being built by Gyalse Tenzin Rabgye. Today the temple is an icon in Bhutan, hosting the Tsechu festival in the Spring. Comparing the real temple to this Lego creation shows just how much detail and work went into this. Even the Lego landscaping is mostly accurate to the real life source.

With a Lego model like this it is usually hard to appreciate the scale of the work. This is a huge display. Easily 6+ feet wide and 3+ feet tall. In fact the designer, Anu Pehrson, has posed next to her work in order for people to understand the scope of this Lego Tiger’s Nest Monastery.

Check out all the details of Tiger’s Nest Monastery (Paro Taktsang) over on Flickr: https://www.flickr.com/photos/anupehrson/15433956257/

Behind the Scenes; Building Lego for Brooklyn Nine-Nine

Brooklyn Nine-Nine recently featured Lego in a scene with Detective Sergeant Terence “Terry” Jeffords (played by Terry Crews). Afterwards something awesome happened. Reddit user austoncall posted a whole bunch of behind the scenes photographs showing what went into creating the Lego tower. Although it took a whole lot more work then someone would expect, the Lego tower looked great as it was being destroyed on set.

The whole project started out as about $300 worth of brand new Lego. Everything was built with 2 complete sets of the Lego King’s Castle (70404), 2 Builders of Tomorrow (6177) sets, 2 Lego Creative Buckets (10662), 1 Lego Creative Building Kit (5749), 1 Lego Education Doors, Windows, & Roof Tiles set (9386), plus a few baseplates and other miscellaneous parts.

The greatest challenge to creating these props, was figuring out what kind of style to build the tower. A sleek modern tower that the best AFOL would create, or a tower created out of a hodgepodge of bricks (like a child would build). After a few attempts, the show decided on something in between. A good decision, as it is instantly recognizable as Lego. In the end three towers were needed, so that the crew could film multiple takes and angles. If you look closely the three towers look similar, but are actually slightly different.

Make sure to check out all the photos of this Brooklyn Nine-Nine Lego Tower prop: https://imgur.com/a/khn83

Plus, here is the original post over on Reddit: http://www.reddit.com/r/pics/comments/2jxexh/i_was_the_one_who_built_the_lego_tower_that_terry/

And, a follow up AMA here: https://www.reddit.com/r/IAmA/comments/2jxrbs/iama_guy_who_built_the_lego_tower_that_was/

*Nevermind!* If you happen to find a clip of the scene from Brooklyn Nine-Nine please share!

This Lego Hulkbuster Armor Is Ready To Fight The Hulk

Most Lego Hulkbuster Armor builds focus on size. Most of them end up towering over the official Hulk figure. Although there is a certain charm to seeing a such a massive Iron Man, having a more proper scale version is awesome. Over on Lego Ideas, Ka.Lor has proposed their version of the Hulkbuster. By not having to design a full pilot cage for an Iron Man Minifigure, Ka.Lor is able to focus on mobility and structure. The end result is a Hulkbuster that is amazingly tiny, yet still incredibly imposing. Some of the details here are great, such at the Lego binoculars being used for fingers, Minifig hands being used for various clips, and even tiny Lego pistols being used to define the chest shape.

Check out, and vote for this Lego Hulkbuster over on Lego Ideas: https://ideas.lego.com/projects/58065

There is also the Lego Iron Man: Hulkbuster Project over here: http://everydaybricks.com/the-iron-man-hulkbuster-project/

The Hobbit Shortened to 72 Seconds, and in Lego

Some people out there think that 3 films is 2 films too many for the Hobbit. Well this video is for them. The Hobbit in 72 Seconds is the creation of the Brotherhood Workshop. As they helpfully point out, this is only 33,000ish seconds shorter than Peter Jackson’s version. They manage to fit in all of the major scenes, from the Unexpected Gathering to the Battle of Five Armies. It should be pointed out that there are massive spoilers here. This extremely well made video features special effect, brick built scenes, and full voice overs. Not only that but they managed to throw in a little something special at the end. Check it out!

The Hobbit shortened to 72 seconds: http://youtu.be/xqsAzTS6KDg

Videos from the Brotherhood Workshop have been covered on LegoGenre before, check those out here: http://everydaybricks.com/?s=brotherhood&submit=Search

Grogmar Trollmaster – A Fearsome Lego Troll and Orc Duo

Grogmar Trollmaster: The Basher of Skulls is one fearsome looking Orc. Created by Slamaskin, using pieces from the recent Fantasy Era Castle theme. Who knew that the relatively plain looking Lego Troll could look so good with some slight modifications. Now sporting a sort of battle backpack with chains and bone decorations. The end result is great, and helps to increase the Trolls usability. Adding this sort of detailing is a good way to get these things to show up in the more detailed Hobbit or Lord of the Rings builds.

Check out Grogmar Trollmaster over on Flickr: https://www.flickr.com/photos/mbb_bros/15391765130/

A Chibi Gundam Made with Lego

Lego and robots are a very popular theme (see here). Sometimes these themes combine to create something cool. This chibi styled Lego Gundam (という訳でガンダム。初代ガンダム。), by Moko, is one of those prefect Lego MOCs. The cute little mecha features SNOT techniques that create a remarkably articulated model. The Mobile Suit needs all of this movability if it is going to survive the war. Lego has been releasing robot themed models at in increasing rate. Maybe someday something as complicated and sleek as this Chibi Gundam will have an official release. We can only hope.

Not only does this Gundam come with a huge gun, and shield but Moko went as far as creating a whole arsenal. It appears that there is access to two sniper rifles, two “light sabers,” a huge mace, and a ball-and-chain. Nothing can stop this robot.

Check out more of this Chibi Gundam over on Moko’s website: http://blog.livedoor.jp/legolego05/archives/52664080.html